- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
Test Standard Should Be Perform (IEC 62660-2)
| Previous | 13 / 14 | Next |
Test Standard Should Be Perform
1) IEC 62660-2Lithium-ion cells for the propulsion of electric road vehicles
Part 2 : Realiability and abuse testing
a) High Temperature endurance
This test is performed to characterize cell responses to high-temperature environment.
a.a) Test
The test shall be performed as follows
- Adjust the SOC of cells to 100% for BEV application, and to 80% for HEV application in accordance with 5.3.
- The cell, stabilized at room temperature, shall be placed in a gravity or circulating air-convection oven. The oven temperature of 130'c + 2k . The cell shall remain at this temperature for 30 min before the test is discontinued.
b) Temperature Cycling
b.a) Test without electrical operation
The test shall be performed as follows.
- Adjust the SOC of cell to 100% for BEV application, and to 80% for HEV application in accordance with 5.3.
- Perform the temperature cycling in accordance with ISO 1670-4 as shown in table 4. The minimum operating temperature shall be -40'C or Tmin specified by manufacturer and the minimum operating temperature shall be 85'c or T max specified by the manufacturer. Perform 30 test cycles as specified by the manufacturer. Perfom 30 test cycles as specified.
